TEC7 Cleaner 500 ml spray cleaner and degreaser - removes adhesive and sticker residues, degreases metal before bonding
- TEC7 Cleaner 500 ml aerosol: universal cleaner and degreaser. Removes adhesive, sticker and contact adhesive residues, degreases metals before bonding and painting. Leaves no oily film.
TEC7 Cleaner is a universal cleaner and degreaser in a 500 ml aerosol. It evaporates softly and slowly, so it works longer on the contamination and makes it easier to remove most chemical pollution. It leaves no oily film and causes no oxidation on light metals, which makes it a good choice for preparing surfaces before bonding, for example in a motorhome or caravan.
Applications
- removing adhesive residues from stickers and labels
- removing residues of contact adhesives
- degreasing and cleaning hand tools, machines and workshop equipment
- fast degreasing of ferrous and non-ferrous metals before bonding or painting
Properties
- soft, slow evaporation - longer working time
- leaves no oily film
- causes no oxidation on light metals
- colourless liquid with a slight solvent odour
How to use
- spray the contamination and leave for a few moments
- wipe off with a clean microfibre cloth and dry
- repeat if necessary
- before bonding, allow the cleaner to evaporate fully
Important notes
- test on an inconspicuous area for colour fastness first
- TEC7 Cleaner dissolves fresh sealant - when finishing a joint, apply it to the spatula in small doses to avoid staining
- for tooling joints on natural stone the manufacturer recommends the solvent-free TEC7 HP Power Clean
Safety
- signal word: Danger
- H222 extremely flammable aerosol, H229 pressurised container: may burst if heated
- H304 may be fatal if swallowed and enters airways, H336 may cause drowsiness or dizziness
- H412 harmful to aquatic life with long lasting effects, EUH066 repeated exposure may cause skin dryness or cracking
- read the safety data sheet before use
- matching TEC7 adhesives and sealants: Transclear, ATEC, Xtack Extreme
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | TEC7 (Novatech International N.V., Belgium) |
| Product | TEC7 Cleaner |
| Type | universal cleaner and degreaser |
| Packaging | 500 ml aerosol |
| Colour | colourless |
| Odour | slight solvent odour |
| Condition at room temperature | liquid |
| Boiling point | 138-175°C |
| Vapour pressure | 1.0 kPa (20°C) |
| Specific gravity | 0.72 (25°C) |
| Flash point | 27°C |
| Auto-ignition temperature | 208°C |
| Shelf life | 36 months in closed original packaging, dry, cool and frost-free |
Questions and answers
Can I bond right after cleaning?
No. Allow TEC7 Cleaner to evaporate fully before bonding.
Does it remove sticker residues?
Yes, removing adhesive residues from stickers and labels is one of the main applications listed by the manufacturer.
Does it leave an oily film?
No. TEC7 Cleaner leaves no oily film and causes no oxidation on light metals.
Is it safe for every colour?
Test on an inconspicuous area for colour fastness before use.
Manufacturer
Novatech International N.V. (TEC7 brand), Industrielaan 5B, 2250 Olen, Belgium.