Plastic Wheel for Vulkana Gas Heater - Replacement Castor, Part No. 1572000017
- Replacement plastic wheel for portable Vulkana gas heaters, part number 1572000017. It replaces a cracked or lost wheel, so you can move the heater across the floor easily again.
A portable gas heater stands on wheels so you can move it from the garage to the awning or from the workshop to the utility room without effort. When one wheel cracks or goes missing, the heater starts to wobble, and pushing it across the floor scratches the surface and stresses the housing. This plastic wheel is an original spare part for Vulkana gas heaters with part number 1572000017, and it lets you restore full mobility without buying a new heater.
Key features
- original Vulkana part number: 1572000017
- material: black plastic
- design with wheel cover and mounting socket
- sold individually, 1 wheel per pack
- pack dimensions 4.7 x 4.2 x 3.6 cm, weight 28 g
Which heater it fits
The wheel belongs to a spare parts series for portable Vulkana gas heaters. The same series includes push buttons, housing corners, oxygen depletion sensors and piezo igniters. You will find part number 1572000017 in the spare parts list of your heater, or on the old wheel if it is marked.
The easiest check is to compare it with the part you are replacing: the shape of the cover, the socket mounting and the dimensions should match. The newer BC 4200 Turbo model uses a separate roller with different dimensions, so for that model choose the part listed under related products.
How to replace the wheel
- Close the bottle valve, disconnect the heater from gas and from mains power if it has an electric element, and wait until the housing has cooled down completely.
- Carefully lay the heater on its side or back on a soft surface, without putting load on the screen and burner.
- Remove the damaged wheel from its mounting in the base of the housing.
- Push the new wheel with its socket into the same place until it sits firmly.
- Stand the heater on its wheels and check that it stands level and moves without wobbling.
Package contents
- 1 plastic wheel for a Vulkana gas heater
Why replace the wheel
A heater standing on three wheels, or on a wheel with a cracked cover, tips easily when you move it. Replacing one inexpensive part restores a stable stance and protects the floor from scratches. If the other wheels are worn too, order a full set at once so the heater stands on matching wheels.
Safety
- Move the heater only when it is switched off and cool.
- Do not replace the wheel while a gas bottle is connected.
- After the replacement, make sure the heater stands stable on a level surface, as described in the heater manual.
Care
Clean the wheel with a dry or slightly damp cloth. Remove hair and threads that wrap around the axle, as they make rolling harder. Do not oil the wheel, because dust sticks to a greasy surface.
Related products
- Push Button for Vulkana heaters - replacement button from the same parts series
- Control Knob for BC-4200 - gas control knob
- Bottle Holder for BC-4200 - holds the gas bottle in the housing
- Oven Roller for BC 4200 Turbo - roller for the newer Turbo version
- Infrared Heater BC 4200 Turbo 2.0 - complete infrared heater
Technical data
| Parameter | Value |
|---|---|
| Type | Replacement wheel for gas heater |
| Heater brand | Vulkana |
| Part number | 1572000017 |
| Material | Plastic |
| Colour | Black |
| Quantity | 1 |
| Pack dimensions | 4.7 x 4.2 x 3.6 cm |
| Weight | 28 g |
Frequently asked questions
Is there one wheel or a set in the pack?
The pack contains one wheel. If you want to replace all of them, order the number you need.
Does this wheel fit the BC 4200 Turbo?
The BC 4200 Turbo uses a separate roller with different dimensions. This wheel is the Vulkana part with number 1572000017.
How do I check that the wheel fits my heater?
Compare part number 1572000017 with the parts list in your heater manual, or compare shape and dimensions with the old wheel.
Do I need tools to replace it?
The wheel sits in its mounting in the heater base with a socket. Usually you just pull the old one out and push the new one in, without extra tools.
Manufacturer
Carbon Zorro Sp. z o.o., ul. Humańska 8, 02-789 Warszawa, Poland