AS Schwabe ROCO 1 Energy Meter with Schuko Plug and Coupling 16 A, MID, 230 V, max. 3.5 kW, IP44 - Mobile Sub-meter for Billing Purposes
- AS Schwabe ROCO 1 energy meter, MID, 230 V, 16 A, max. 3.5 kW, IP44. Cables 2 x 1.5 m H07BQ-F 3G2.5 mm² with Schuko plug and coupling. Non-resettable register.
The AS Schwabe ROCO 1 energy meter measures how much electricity the connected devices use. It is MID compliant and therefore suitable for billing, for example on a campsite, in a site trailer or when subletting. On each side it has 1.5 m of blue H07BQ-F 3G2.5 mm² polyurethane cable ending in a Schuko plug and Schuko coupling with protective cap, 230 V, 16 A.
Electricity use under control
Plug the meter in between the power source and the loads. Everything that flows through it is counted in kWh. It is useful for billing electricity on a campsite pitch, on a building site, on a farm and wherever energy hungry devices such as dehumidifiers or heaters run.
- Billing electricity on campsites and when subletting
- Building sites, drying and heating
- Farms and workshops
- Checking the consumption of a single device
MID compliant meter
The built-in single-phase AC meter meets the European MID directive and has accuracy class 1/B. The 5+1 digit mechanical register shows up to 99999.9 kWh, can be read through the window at any time and cannot be reset. The meter measures from 0.25 A, the base current is 5 A and the maximum 45 A, while the connectors limit the load to 16 A.
Housing for outdoor use
The housing made of tough plastic is impact resistant (IK10) and splash proof (IP44), so the meter can lie next to a post or on a building site. It has a tab for hanging and works from -25 °C to +55 °C. The polyurethane H07BQ-F cable copes well with abrasion, oil and low temperatures.
The other version
The same meter as ROCO 3 with CEE connectors is the AS Schwabe ROCO 3 energy meter. For installation in a distribution board, use the AS Schwabe DIN rail meter.
Key data at a glance
| Feature | Value |
|---|---|
| Brand | AS Schwabe |
| Type | mobile energy meter, single-phase |
| Input | Schuko plug 16 A |
| Output | Schuko coupling 16 A with protective cap |
| Cable | 2 x 1.5 m, polyurethane H07BQ-F 3G2.5 mm², blue |
| Rated voltage | 230 V |
| Rated current | 16 A |
| Maximum power | approx. 3.5 kW |
| Current range | 0.25 to 5 (45) A |
| Accuracy class | 1/B |
| Conformity | MID, approved for billing |
| Register | mechanical 5+1 digits, max. 99999.9 kWh, non-resettable |
| Pulse output | S0, 1000 imp/kWh |
| Protection rating | IP44, impact resistance IK10 |
| Operating temperature | -25 °C to +55 °C |
| Dimensions | housing approx. 300 x 350 x 100 mm |
| Weight | approx. 1 kg |
Questions and answers
Can the meter be reset?
No. The register is mechanical and cannot be turned back or reset. For billing, note the reading at the start and end of the period.
Can I use it for billing?
Yes, the meter complies with the MID directive 2014/32/EU and is intended for billing purposes.
What load can it take?
Up to 16 A at 230 V, about 3.5 kW. That is the rating of the connectors and cables.